HSC 3000

The high-tech HSC 3000 consists of a PC-control system. The computer as well
as the screen are placed splash-proof in a special housing and there is no need
of further control system hardware. The complete CNC-functions are regulated by
software.

Hence, this control system is enormously robust according to the principle:
"Nothing can break whenever there is nothing to break."

VIDEO
Machine system
WiTEC
in the application
Duration: 5 min.

VIDEO
Dental milling technology in
the application
Duration: 12 min.

Determined by the system this
can taking a little time.

Because of the handling via Windows you will familiarize with the control system
    in very little time.
While control sequences are at work other programs, such as CAM-modules for
    example, can run at the same time as to use any processor time which might
    be left over effectively.
The connection to the machine is very simple since the standard pc-hardware
    can be used. This does not count only for the network connection but also for
    special functions like SMS outputs, signal outputs or according functions.
Because of the open structure there is even the possibility to add complex
    individual programs and special adjustments.

Offering up to 3000 sentences per second this control system is extremely fast
because of its sophisticated programming technique. Taking the example of a very
good surface in polished quality you would work in steps of 0,1 mm. Multiplied by
the factor of 3000 blocks per second this makes an outstanding chart speed of
300 mm per second or 18 m per minute. Convincingly, this control system does
not get slowlier when interpolishing very tidy or in an especially fine way.
This control system also offers a very fine and quick adjustment of up to 16.000
regulation cycles in the attitude control. This is essential for best clean surfaces
at high speed. Also the regulator for the number of revolutions works extremely fast
which is another crucial feature for best surface qualities.